BENEFITS

• Enhances product performance by improving functional efficiency and deeper surface penetration.
• Maintains key properties of the original formula—will not alter pH, specific gravity, VOC levels, flammability, or corrosiveness.
• Compatible with existing surfactant systems, blending seamlessly into most finished cleaning formulations.
• Stable nano-dispersion ensures that nanoparticles stay evenly distributed and do not separate over time.
• Boosts surface wetting and spreading, allowing active ingredients to reach both the surface and subsurface layers.
• pH-stable and effective within a neutral range of pH 5–7, making it suitable for most cleaning environments.
• Reduces cleaning time while increasing the cleaning power and efficacy of your finished product.
• Extends shelf life by reinforcing formulation stability.
• Eco-conscious, non-corrosive, and non-flammable—safe for use in environmentally sensitive applications.

DIRECTIONS FOR USE

• Slowly pour Nano Additive into the already formulated, finished product.
• Mix gently to minimize the formation of foam. Avoid vigorous agitation as it may increase foaming unnecessarily.
• Note: The solution may initially appear cloudy (Cloud Point) but will gradually clear as it stabilizes.
• Important: Do not mix this additive with raw materials or base concentrates. It is intended for use in finished products only.
• For glass cleaning formulations, use 2–4 fluid ounces per gallon of finished product for optimal performance.

CAUTION

• Avoid eye contact. This product should not be ingested under any circumstance.
• When handling, we recommend wearing protective eyewear (e.g., safety glasses or goggles) to prevent accidental splashes.
• For prolonged use, wear chemical-resistant gloves (rubber, neoprene, nitrile).
• Remove any contaminated clothing and do not reuse until it has been thoroughly laundered.
• After handling, wash hands thoroughly with soap and water.

KEEP OUT OF REACH OF CHILDREN.

NOT FOR INTERNAL USE.

FIRST AID MEASURES

• Eyes: Immediately flush eyes with clean water for at least 15 minutes, lifting upper and lower eyelids occasionally. Seek medical attention if irritation persists.
• Skin: Rinse the affected area with water. If irritation develops, consult a physician.
• Ingestion: Do not induce vomiting. If vomiting does occur, keep the head lower than the hips to reduce the risk of aspiration. Seek emergency medical attention immediately.

PRODUCT DESCRIPTION

Nano Gun Grease-GTI is a next-generation firearm lubricant engineered using advanced nanochemistry to deliver deep surface penetration and long-lasting protection. Specifically designed to reduce wear, fatigue, and metal-to-metal friction in critical firearm components, this all-synthetic, non-toxic grease offers outstanding performance in conditions where traditional lubricants often fail. Its low-viscosity formulation allows it to migrate effortlessly into hard-to-reach internal areas—making it ideal for trigger assemblies and areas where full disassembly isn’t practical. Whether for quick lubrication top-ups or deep protection, Nano Gun Grease-GTI maintains optimal weapon performance even in the most challenging environments.

PERFORMANCE CHARACTERISTICS

Nano Gun Grease-GTI has earned the trust of U.S. Special Forces, top law enforcement agencies, and competitive sport shooters globally. It excels in extreme environments including sand, grit, high humidity, saltwater exposure, and both freezing and scorching temperatures. The grease not only prevents galling and short-stroking but also enhances bore accuracy, boosts muzzle velocity, and ensures reliable function under high pressure and heavy load-bearing conditions. It is also a superior choice for long-term firearm storage, maintaining weapons in a fire-ready state without the need for frequent reapplication.

APPLICATION & COMPATIBILITY

Applied just like traditional gun grease, Nano Gun Grease-GTI is ideal for use on metal-to-metal contact surfaces where a grease-type lubricant is required. It performs exceptionally on firearms with extended contact mechanics such as 1911 rails, M1 Carbine bolts, and M16 bolt carriers. Its nanocomposite formula clings firmly to internal parts and delivers consistent lubrication, regardless of whether the weapon is in active use or stored long-term.

UNIQUE FEATURES

• 100% synthetic and non-hydrocarbon-based
• VOC-free, odorless, non-gumming, and non-evaporating
• Will not separate, dry out, sag, or create excessive carbon build-up
• Protects in extreme temperatures from -65°F to 550°F
• Reduces metal stress from expansion/contraction in extreme heat and cold
• Repels moisture, dust, and dirt—even in saltwater environments
• Safe, non-toxic, and eco-conscious—no harmful solvents or petroleum

Nano Gun Grease-GTI is more than just lubrication—it’s nanotechnology reimagined for modern firearms. Engineered for elite performance and peace of mind.

Product Description

Nano Gun Lube-X3i is engineered with highly-complex nanochemistry for deeper penetration and provides long-lasting protection. Nano Gun Lube-X3i delivers exceptional performance by reducing wear and fatigue on key firearm metal components. Its lighter viscosity allows for easy migration into hard-to-reach weapon parts, making it ideal for dispensing where a full disassembly is neither desirable nor practical, such as trigger assemblies. Also, it is excellent for general quick-lubrication replenishment on all stationary and moving parts to perform at their best. This gun lube is formulated with a non-hydrocarbon-based chemistry and an all-synthetic nanocomposite, non-toxic material that delivers long-lasting optimum performance. It outperforms all traditional gun oils.

Performance characteristics

Since Nano Gun Lube-X3i delivers exceptional performance in adverse conditions (sand, dirt, high-humidity, saltwater, and extreme temperature environments).It has been the number one choice of the U.S. Special Forces, leading law enforcement, and sport shooters worldwide. It provides ultimate lubrication protection for all wear parts and the bore—eliminating galling and short-stroking, improving bore accuracy, and increasing muzzle velocity. Nano Gun Lube-X3i is the best choice in extreme-pressure and heavy-load-bearing conditions. It is excellent for fire-ready long-term weapon storage and maintenance. Nano Gun Lube-X3i is formulated with unique all-synthetic, non-toxic, nanocomposite particles having the lowest-known friction coefficient.

Nano Gun Lube-X3i is more than just gun lube, it is the next generation of nanotechnology lubrication. It is applied the same way as traditional gun lube.

Unique Features

Designed to replace all hydrocarbon-based gun oils, CLP’s, and dry lubes;  it will not dry, evaporate, separate, and/or cause gumming, bad odor, or excessive carbon buildup like all other traditional gun oil and lubricants. Nano Gun Lube-X3i provides the highest possible protection against wear, humidity, and moisture, including saltwater. It leaves a long-lasting protection that repels dust and dirt and will not evaporate—excellent for “ready-to-fire” long-term storage. It provides optimum friction reduction (lubricity) when wet or dry. The functional temperature range is between -65°F–550°F. Gun Lube-X3i keeps all internal moving and non-moving parts from overheating and prevents and minimizes metal fatigue and stress caused by contraction and expansion of gun metal due to extreme temperature fluctuations.

Nano Overcoat 1100 is a transparent protective barrier formulated specifically for painted masonry surfaces, fiberglass and plastic panels, and painted metal surfaces.

Note: This product is not recommended for use on wood surfaces.

Advantages

• Penetrates deeply into the surface.
• Creates a slick, non-stick protective layer.
• Fills microscopic pores within the surface material.
• Repels dirt, dust, moisture, soap scum, and stains.
• Simplifies future cleaning, making it quicker and more efficient.
• Helps prevent discoloration and staining over time.

Application

Step 1:

Before applying Nano Overcoat 1100, clean the surface thoroughly using EST Heavy Duty Cleaner. This step removes embedded dirt and stains and opens up the surface pores, allowing the coating to bond effectively.

Note: Always follow the instructions provided on the EST Heavy Duty Cleaner container before use.

Step 2

Apply Nano Overcoat 1100 using an airless sprayer. Ensure the surface is completely clean and dry before application. For highly porous surfaces, 2–3 coats may be needed until the surface is fully saturated. Allow 2–3 hours for the coating to fully penetrate and cure.

Coverage / Dilution

Mix 5 gallons of concentrated Nano Overcoat 1100 with 45 gallons of water to produce 50 gallons of ready-to-use solution.

Estimated Coverage:

One gallon covers approximately 1,000–1,200 square feet, depending on the porosity of the surface.

Recommended Application Frequency

Depending on the condition of the surface, Nano Overcoat 1100 can be applied once a week or every two weeks for optimal performance and protection.

Nano Prime Prep Coat is formulated for use on all types of boat bottoms and sides — including fiberglass and metal — as well as ATV bodies, jet skis, and water skis.

Note: Not recommended for wood boats.

Please contact your local EST, Inc. representative for guidance on treating wooden boat surfaces.

Advantages

• Penetrates deeply into surface material
• Forms a long-lasting, permanent barrier
• Seals and fills all pores on the surface

Applications

Step 1:

Before applying Nano Prime Prep Coat, clean the surface thoroughly using Heavy Duty Fiberglass Cleaner. This removes barnacles, buildup, and stains while opening the pores to allow proper penetration and adhesion of the Prime Prep Coat.

Note: Always refer to the instructions provided on the Heavy Duty Fiberglass Cleaner container before use.

Step 2:

Apply Nano Prime Prep Coat using a brush, roller, or spray. Ensure the surface is clean and dry before starting. For porous surfaces, apply multiple coats as needed — saturate the surface fully by flooding it with product. Allow 8–10 hours for the coat to absorb and cure.

If the surface still appears wet after 10 hours, gently wipe off the excess with a dry towel, then buff lightly with a polishing pad until the surface is dry and smooth.

Coverage:

Approximately 500–900 sq. ft. per gallon, depending on the type and porosity of the existing paint. Always test a small area to estimate coverage accurately.

Step 3:

Apply Nano Tech Polish for Boats using a spray bottle. Wipe with a clean cotton towel. Apply up to three coats, if needed. Continue polishing until the surface is slick and glossy.

Nano Tech Golf Ball Polish is formulated using advanced 2nd-generation nanotechnology. It contains no hydrocarbons, acids, phosphates, or animal fats, making it fully compliant with California VOC regulations. Recognized as a “green” product, it is completely free from harmful chemicals.

ADVANTAGES

• Enhances drive distance by up to 40–50 yards
• Reduces friction, maintaining ball direction even in 40 mph winds
• Contributes to better scoring performance
• Does not alter the ball’s weight, size, or color
• Can also be applied to the shaft of the club
• Keeps the ball cleaner for longer; surface becomes moisture- and stain-resistant
• Safe for the environment — fully ozone-safe and VOC-compliant

APPLICATION

Spray the product directly onto the golf ball, then wipe clean with a soft cloth or tissue. For optimal performance, apply two coats initially, wiping off between each coat.

SAFETY

This product is:

• Odorless
• Non-Hazardous
• VOC-compliant
• Non-Flammable
• Non-Corrosive

Safe for use around plants, vegetation, paint, metal, wood, plastic, fiberglass, fabric, and most hard surfaces. It will not ignite or combust under any conditions.

Operating Temperature Range: from -60°F to 800°F — product will not burn off or wear off.

PRODUCT DESCRIPTION

Nano Tech Polish 2nd Gen is a microscopic, invisible protective coating formulated with advanced Nano-Fusion technology. It is designed to preserve the natural look of surfaces, resist fine scratches, repel dirt and moisture, and make cleaning fast and easy. The coating effectively removes ordinary soil, dust, fingerprints, and static from surfaces like doorknobs.

When applied to vehicles, it helps reduce wind drag (friction), which can improve fuel efficiency. It also prevents snow and ice from sticking to windshields. Nano Tech Polish is suitable for a wide variety of materials, including vinyl, plastic, fiberglass, rubber, kitchen countertops, and other man-made surfaces. It is eco-friendly and intended for use on most indoor and outdoor hard surfaces.

FEATURES / BENEFITS

Nano Tech Polish creates a slick, smooth surface to which nothing can easily stick. It eliminates static and helps maintain surface cleanliness by repelling dirt, water, dust, snow, and ice. The product improves fuel efficiency in automobiles, planes, boats, and buses by minimizing surface friction. It also helps reduce and repair minor scratches. Unlike traditional waxes, Nano Tech Polish does not build up over time, nor does it alter the weight or dimensions of the surfaces it’s applied to.

MARKETS

This product serves hundreds of industries and specialty markets, including:

• Camera lenses
• Cell phone screens
• Computer monitors
• Construction equipment
• Digital instruments
• Digital media screens
• Electronics
• Golf balls
• Hunting gear and scopes
• Housing and real estate
• Industrial surfaces
• Institutional facilities
• Janitorial services
• Jewelers
• LCD and LED TV monitors
• Lighting and fixtures
• Liquid crystal monitors
• Medical, MRI, and X-ray equipment
• Microscopes
• Mirrors
• Museums and antique preservation
• Music organs
• Brass and copper polishing
• Restaurants
• Schools
• Shower glass doors
• Small device screens
• Snow removal equipment
• Sporting goods
• And many more specialized applications.

TYPICAL APPLICATIONS

Ideal for:

• Water sports and snow sports equipment
• Metal surfaces, including copper and brass
• Polished stone countertops and surfaces
• Camera and polycarbonate lenses
• Digital screens: LCD, LED, and other crystal-based monitors

The formula can be customized for specific uses based on the application.

PHYSICAL PROPERTIES

Nano Tech Polish is a milky liquid with a slight sweet aromatic scent. It has a specific gravity between 1.0 and 1.05. It is water-soluble (99%), with a pH range of 6.8 to 7.4. Its viscosity and vapor density are similar to water, and it has no flash point. VOC content is less than 14 grams per liter.

Active nano-drivers include:

• Metallic Zinc – 75 nm
• Titanium – 70 nm
• Magnesium – 70 nm
• Coverage Rates:

First coat: Approximately 1,000 to 1,500 sq. ft. per gallon

Second coat: Up to 2,000 sq. ft. per gallon depending on surface density and porosity

PROCESSING INFORMATION & FUNCTIONAL PROPERTIES

Operating temperatures range from 60°F to 500°F, with an ideal application temperature between 40°F and 90°F. Dry film thickness is not measurable on the nano scale. No dilution is recommended or required.

RESISTANCES AND REPELLENCY

Nano Tech Polish offers superior resistance to:

• Water
• Salt
• Ice
• Snow
• Frost
• Dust
• Dirt
• Fingerprints
• Mud
• Brake dust
• Wind drag
• Static
• UV rays
• Minor surface scratche
• Friction
• Airborne particles
• Smoke
• Smog
• Fog

It also functions as an anti-static barrier, helping surfaces stay cleaner longer.

SUGGESTED APPLICATION METHODS

Apply the product at full strength. Spray directly onto the surface and wipe dry using a clean cotton or microfiber cloth. For vehicle applications, apply two coats and polish using a slow-speed buffer for best results.

For first-time use, applying two coats is recommended. It may also be sprayed onto wet surfaces and wiped dry. Reapply as needed based on use and exposure.

SUGGESTED PRETREATMENT

Surfaces heavily soiled with grease or grime should be cleaned prior to application. Ensure all vehicle surfaces are completely clean and dry before applying the product.

ADDITIONAL INFORMATION

Do not apply Nano Tech Polish to floors. Treated floors can become extremely slippery and hazardous. If overspray reaches the floor, clean immediately with floor cleaner or a strong detergent.

STORAGE

Store in a cool, dry place between 40°F and 90°F, away from direct sunlight. Keep the container tightly closed when not in use.

SHELF LIFE

When stored at room temperature, the product has a shelf life of up to five years. If stored for an extended period, shake or lightly agitate the container before use.

SAFETY

This product is odorless, non-hazardous, VOC-compliant, non-flammable, and non-corrosive. It is safe for use around plants, living vegetation, and on surfaces including paint, metal, wood, plastic, fiberglass, and fabric.

Working temperature range: from -60°F to 800°F.

The product will not burn off, wear off, or ignite.

LIMITED WARRANTY

EST Inc. is not liable for injury, damage, or loss if the product is used outside the instructions provided or if safety precautions are ignored. Because storage, handling, and application are beyond our control, our warranty is limited strictly to the purchase price of defective material.

TECHNICAL SUPPORT

For more information or testing data, please contact EST Inc. directly. Independent laboratory test results are available upon request.

PACKAGING

Nano Tech Polish is available in:

• Quarts
• Gallons
• 5-gallon pails
• 15-gallon drums
• 20-gallon containers
• 55-gallon drums
• 275-gallon plastic totes

Custom packaging options are also available upon request.

Nano Tech Polish is a nanoscopic, invisible protective coating developed with advanced Nano Technology. It is specifically designed for application over existing boat bottom paint. 

This formula preserves the natural appearance of surfaces, resists fine scratches, repels dirt and water, and simplifies future cleanings.

ADVANTAGES

• Reduces friction and repels dirt, water, dust, snow, and ice
• Leaves surfaces ultra-slick and smooth — nothing adheres to it
• Repels hull scum and prevents water staining
• Minimizes organic matter buildup on the boat's underside
• Dissipates static and boosts fuel efficiency
• Helps reduce and repair fine scratches without build-up like conventional waxes
• Does not alter the weight or dimensions of any surface
• Safe and non-toxic to aquatic and marine life

APPLICATION

Surface Preparation:

Before applying, remove heavy deposits of grease and grime using EST Inc. HD Nano Boat Hull Cleaner. Ensure the boat — whether new or used — is clean and completely dry.

For older boats, apply Nano Primer first to prepare the surface before applying Nano Tech Polish.

Spray and Wipe Method:

Apply the product full-strength by spraying directly onto the surface. Wipe dry with a clean, dry microfiber cloth. Turn the cloth frequently and replace it once it becomes saturated.

To enhance performance, apply two coats, then finish with a slow-speed buffer or polisher for a high-gloss effect.

Electrostatic Application:

Using an electrostatic spray gun, apply a full coat across the entire surface. Wipe away any excess wet residue with a microfiber cloth. Wait 30 minutes to 1 hour, then apply a second coat using the same method. Wipe again with a clean, dry microfiber cloth.

If any haze, residue, or uneven areas appear after two coats, lightly mist those areas again and wipe clean. Finalize the surface using a slow-speed buffer or polisher.

Reapplication:

Reapply Nano Tech Polish after each cleaning of the boat’s surface to maintain optimal protection.

Coverage:

Initial coat: 1,000–1,200 sq. ft. per gallon

Second coat: 1,500–1,800 sq. ft. per gallon

Warning:

Do not use this product on floors. It can create a dangerously slick surface. If overspray contacts the floor, clean immediately with a strong detergent or floor cleaner.

CONDITIONS OF SALE

Always follow all label directions. Since the manufacturer has no control over weather, surface condition, or application method, the user assumes all responsibility for proper use.

EST Inc. is not liable for injury, damage, or loss resulting from misuse, improper storage, or failure to follow product instructions.

STORAGE AND HANDLING

Follow directions carefully. Contact your dealer or supplier for application advice and best-use timing.

• Do not mix this product with household cleaners.
• Wear rubber gloves and eye protection during use.
• Avoid direct contact with open wounds, eyes, or skin. Harmful if swallowed.
• Store at 40°F to 90°F, away from direct sunlight.
• Keep the container tightly closed when not in use.

Product shelf life: up to two years under proper storage conditions. Shake or gently agitate before use if stored long-term.

FIRST AID

• Eyes: Rinse immediately with plenty of water for at least 15 minutes, lifting eyelids occasionally. Seek medical attention if irritation continues.
• Skin: Wash affected area thoroughly with soap and water. If irritation develops, consult a physician.
• Ingestion: Do not induce vomiting. If vomiting occurs, keep the head below hip level to prevent aspiration. Seek emergency medical help immediately.

This uniquely formulated product uses nano-polymeric chemistry to treat a wide range of glass surfaces including automotive glass, solar panels, household and industrial windows, aircraft windshields, plexiglass, polycarbonate, and other interior or exterior glass types.

When applied, the treatment forms a molecular bond with the surface, filling in micro- and nano-voids. This not only enhances clarity and visibility, but also improves driver response time by up to a full second during wet, wintry, or rainy conditions — equal to an added four car lengths of stopping distance.

Nano Tech Polish for Glass is an invisible water-repellent treatment that makes ice and snow removal easier in harsh winter weather and ensures a clear field of vision during heavy rainfall.

BENEFITS

• Improves visibility and safety in all weather conditions
• Enhances driving comfort in rain, snow, and ice
• Makes it easier to remove ice, snow, frost, salt, mud, and bugs
• Boosts the effectiveness of wiper blades for quicker removal of moisture
• Shields glass from UV exposure and long-term weathering
• Reduces surface friction and repels water, dust, dirt, and insects
• Extends the lifespan of glass surfaces and wiper blades

APPLICATIONS

To apply, spray directly onto the windshield or other glass surface and wipe off using a clean microfiber or cotton cloth. For optimal adhesion, apply two coats during the initial treatment.

After the second coat, buff the surface with a dry polishing pad. This step helps the nano-polymer to form a stronger, longer-lasting bond with the glass.

While the coating can last up to one year depending on climate and usage, it is recommended to reapply every 6 months for consistent performance. If visibility declines during rain, reapply immediately.

Apply two coats of Nano Tech Polish for Glass during the first treatment. Spray and wipe clean with a microfiber cloth.

Note:

This product is ideal for resale or service use by auto dealers, car wash centers, detailing shops, quick-lube franchises, and repair facilities, who can offer it as a value-added service. It can also be sold at auto parts stores, gas stations, windshield repair shops, and any location where automotive supplies are available.

Additionally, Nano Tech Polish for Glass can be added to the windshield washer fluid reservoir, allowing the treatment to be reapplied every time washer fluid is used.

For best performance, apply Nano Tech Polish manually to both front and rear windshields before adding it to the washer reservoir.

STORAGE

Store between 40°F and 90°F, away from direct sunlight. Always keep the container sealed when not in use.

SHELF LIFE

When stored at room temperature, shelf life is up to five years. If the product sits for an extended period, gently shake or agitate before use.

SAFETY

This product is:

• Odorless
• Non-Hazardous
• VOC-compliant
• Non-Flammable
• Non-Corrosive

It is safe for use around plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric, and most hard surfaces.

Operating temperature range: from -60°F to 800°F — it will not burn off, wear away, or ignite.

LIMITED WARRANTY

EST Inc. is not responsible for any injury, damage, or loss resulting from use inconsistent with label directions or safety precautions. Because we do not control storage, handling, or application conditions, liability is limited to the purchase price of any defective material.

TECHNICAL SUPPORT

For more information or lab testing data, contact EST Inc. directly. Independent lab test results are available upon request.

PACKAGING

Nano Tech Polish for Glass is available in:

• Quart and gallon bottles
• 5-gallon pails
• 15-gallon drums
• 20-gallon containers
• 55-gallon drums
• 275-gallon plastic totes

Custom packaging options are also available upon request.

This uniquely formulated product is designed with nano-polymeric chemistry for all automotive glass, solar panel glass, household and industrial window glass, aircraft windshield, plexi glass, polycarbonate glass and many other interior/exterior glass surfaces. This treatment forms a bond with the glass surface, fills in micro and nanovoids, and helps improve clarity, visibility and driving response by a full second in wet wintry and rainy conditions. That’s about four car lengths extra stopping distance.

This invisible nano water repellent treatment for windshield helps make ice and snow easier to remove in cold icy and snowy winter weather and provides a clear view in extreme rainy weather.

BENEFITS

• Improves all weather visibility and safety.
• Increases driving comfort.
• Facilitates easy removal of ice, snow, frost, salt, mud and bugs.
• Increase the effectiveness of wiper blades to remove water, snow and ice quickly.
• Protect glass form UV and weathering effects.
• Reduces frictions and repel water, dust dirt and bugs.
• Increase the life of glass surfaces.
• Increase the life of wiper blades.

Applications

This invisible nano treatment is generally applied by spraying directly on to the windshield surface and by wiping off with micro fiber or cotton cloth. Initially apply two coats for proper treatment and adhesion to the windshield surface. After the second treatment, windshield surface can be buffed with dry polishing pad. By buffing, nano polymer creates a stronger more permanent bond with the windshield surface.

Depending on the weather the water repellent nano treatment can last, as long as a year, but on average it should be reapplied every 6 months for best results. Treatment should be re-applied as soon as visibility starts to become impaired in wet weather.

Note: This nano treatment product can be sold to auto dealers, car wash and auto detailing facilities, quick oil change franchises, or any auto repair facilities. These companies can install this treatment for their customers for a small fee. This product can be sold at most auto parts stores, gas stations, auto dealers, windshield repair companies, or wherever auto supplies are sold.

This product can be added to the existing windshield washer fluid reservoir mixed in with windshield washer fluid as a nano treatment for the windshield. This will replace the treatment every time as the washer fluid is sprayed on the windshield.

STORAGE

Store between 40 °F and 90 °F and away from direct sun light. Keep container closed when not in use.

SHELF LIFE

Stored at room temperature, shelf life is up to five years. If product is stored for long time lightly agitate or shake well before use.

SAFETY

This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.

Working temperature range from -60°F to 800°F. Will not burn off or come off.

LIMITED WARRANTY

EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed. EST Inc. has no control over the storage, handling or use of this product, thus the guarantee is limited to the purchase price of the defective material only.

TECHNICAL SUPPORT

Contact EST Inc. for further details. Independent lab test data are available upon request.

PACKAGING

Nano Tech Polish is available in quart and gallon bottles, 5 gal, 15 gal, 20 gal, 55 gal, drums, and 275 gal plastic totes. Custom packaging is available upon request.